USV performing bathymetric survey on an Alberta lake or river

Bathymetric & Hydrographic Surveys in Alberta

Survey-grade hydrographic mapping using USV-mounted single-beam sonar — safe, efficient, and accurate results for tailings ponds, rivers, lakes, reservoirs, channels, bridges, and infrastructure across Alberta, BC, and Saskatchewan.

Overview

Hydropower Reservoirs River Crossings Reclamation Marine Environmental Municipal
45+
Years Combined Experience
±0.15–200 m
Depth Range
USV-equipped
Safe Hydrographic Survey
3–5 days
Typical Mobilization

We perform survey-grade hydrographic and bathymetric mapping with a single-beam echo sounder (SBES) on an unmanned surface vessel (USV), safely capturing reliable depths in rivers, canals, reservoirs, storm ponds, harbours, and around bridges and intakes. The USV keeps crews off the water, works close to edges with minimal wake, and launches from tight access points — ideal for busy worksites and sensitive habitats. Where conditions allow, the system maps to 200 m depth and can be combined with aerial or terrestrial LiDAR to produce a seamless topo-bathymetric surface. For deeper context on bathymetric methods and sensor selection, see our Bathymetric Methods in Surveying article.

Deliverables include clean soundings, bathymetric terrain and contours, and cross-sections packaged for CAD/GIS to support engineering, dredging, and asset management.

Depth Accuracy
±0.01 m*
Horizontal Accuracy
±2–5 cm*
Resolution
0.01 m
Depth Range
0.15–200 m

*Depends on environment, sound-velocity stability, and control quality.

Conventional vs Manned Boat vs USV Bathymetric Methods

Choosing the right deployment method for the water body, access, and safety profile of your project.

CapabilityConventional (wading / staff)Manned BoatUSV (ours)
Operator safetyShore / wadingCrew on boardRemote & safe
Hazardous water (currents, ice, contamination)High riskModerate riskLow risk
Shallow water accessExcellent (where wadable)LimitedExcellent
Coverage rateSlowFastFast
Mobilization & launchMinimalTrailer & ramp requiredSingle vehicle
Crew size2–3+2–3+1–2
Accuracy±5–15 cm±5–10 cm±5–10 cm
Best fit forSpot soundings, very shallowLarge lakes, deep open waterAny water body — shallow, deep, hazardous or confined

For workflow detail: Bathymetric Methods in Surveying.

See real deliverables

Open our Sample Data Portal — preview orthophotos, point clouds & 3D tiles in your browser.

Bathymetric survey of an Alberta river crossing
Featured Project

River Crossing Bathymetric Survey

Single-beam bathymetric survey of a pipeline river crossing — merged with above-water LiDAR to produce continuous terrain.

View all projects

Why Choose Convex Geomatics for Bathymetric Surveys in Alberta

  • Calgary-based team with deep local knowledge of Alberta waterways and regulations
  • USV technology for safer, faster, and more environmentally friendly surveys
  • Seamless integration with our UAV LiDAR and topographic surveying services
  • Engineering-grade deliverables tailored for consultants, municipalities, and energy clients
  • Proven workflows with full QA/QC documentation and vertical datum control

Bathymetric Surveys for Alberta's Key Industries

Reservoirs & Water Storage

Rivers & Flood Studies

  • River cross-sections, thalweg profiling, and hydraulic model support
  • Floodplain, channel morphology, and erosion monitoring surveys
  • Integrated topo-bathymetric data for engineering and flood studies

Mining & Environmental

Dams, Canals & Infrastructure

  • Bathymetric surveys for dams, intakes, canals and culvert systems
  • Scour assessment around hydraulic structures and bridge crossings
  • Inspection support using USV, sonar and hydrographic sensors

Deliverables

Core Outputs

  • Soundings (XYZ/CSV) with QA codes
  • Bathymetric DTM/DSM (GeoTIFF) with hillshade
  • Contours (0.25–1.0 m)

Engineering Products

  • Cross-sections, profiles, alignment sheets
  • Scour, siltation and volume change assessments
  • Bottom surface models and volume calculations
  • Depth heatmaps and contours
  • Shoreline & structure mapping (bridges, intakes, outfalls)

Formats

XYZ/CSV GeoTIFF DWG/DXF SHP/GDB PDF maps

Workflow

  1. Planning & permits, safety, datum/level strategy
  2. Calibration: patch test, bar-check, latency/motion checks
  3. Acquisition: SBES lines, overlaps, shoreline tie-ins
  4. Corrections: tide/RTK water-level, SVP/refraction, heave
  5. Cleaning: automated filters & manual QA
  6. Gridding & modeling: DTMs, contours, sections
  7. QA/QC & reporting: check lines, statistics, coverage
  8. Delivery: CAD/GIS packages & documentation

Technology

Sonar & Sensors

  • Single-beam echo sounder (SBES)
  • Optional multibeam and ADCP payload integration
  • IMU for heave, pitch, roll, and yaw compensation

Positioning

  • RTK/PPK GNSS with local control
  • RTK water level and elevation corrections
  • Chart and project vertical datums
  • Integrated topo-bathymetric survey workflows

What Affects the Cost of a Bathymetric Survey?

Every project is quoted on its own scope. These are the factors that drive it, so you can tell us what matters before we price it.

Water body size & depth

  • Surface area or river reach length
  • Depth range and required line spacing

Access & safety

  • Launch points and site access
  • Industrial or tailings-site safety requirements

Accuracy & control

  • Required vertical accuracy and datum
  • Tie-in to existing site control

Shorelines & dry areas

  • Whether banks and exposed areas also need mapping
  • Merging above- and below-water surfaces

Deliverables

  • Surfaces, contours, sections, capacity curves, volumes
  • CAD/GIS formats and reporting needs

Repeat surveys

  • One-off capture or scheduled monitoring
  • Comparison with previous surveys or design

Frequently Asked Questions

It depends on the size and depth of the water body, access and site safety requirements, the accuracy and line spacing needed, whether shorelines also need mapping, and the deliverables you need. Send us the location, an outline of the area and what you need delivered, and we’ll prepare a quote for your specific project.
A bathymetric survey measures the depth and shape of the bed of a water body – a river, lake, reservoir, pond or channel – to produce an underwater terrain model. Depths are recorded with sonar from a boat or unmanned surface vessel, positioned with GNSS, and referenced to a vertical datum so they can be combined with land survey data. The results are used for capacity and dredge volumes, crossing design, flood modelling and infrastructure inspection.
Typical vertical accuracy for our single-beam surveys is in the range of ±5–10 cm, depending on water conditions, bed material and control. Horizontal positioning uses RTK/PPK GNSS. Each survey is delivered with a control summary and check-point statistics so the achieved accuracy is documented for your project.
We use a single-beam echo sounder (SBES) mounted on a USV for inland engineering work.
Yes. Repeat single-beam surveys on the same control and datum let us compare bottom surfaces over time, showing scour, deposition and volume change, and supporting pre- and post-dredge quantity reporting.
Yes — we routinely fuse single-beam echo sounder (SBES) data from our USV with UAV, airborne, and terrestrial LiDAR of banks, structures, and floodplains. Everything is tied to the same control and vertical datum; we apply a clean shoreline seam and hydro-flattening to deliver a seamless topo-bathymetric surface with contours, cross-sections, and CAD/GIS files — ideal for bridges, channels, reservoirs, and coastal assets.
Single-beam soundings, profile-derived bathy DTM/contours, cross-sections, scour and siltation assessments, and CAD/GIS packages (DWG/DXF, GeoTIFF, SHP/GDB, PDF maps) — all with a documented QA/QC report.

Ready to discuss your bathymetric survey project?

Request a Quote